vATIS

Introduction

vATIS is a software used to generate ATIS information for specific airports (max 4). Controllers can choose which aerodrome configuration they are using (active runways etc.) and along with real-world weather, they can generate an ATIS.

Profiles

Profile	Description	Download Link	Installation
vATIS Profile	Airports Settings for vATIS - LGGG	Download	Open vATIS, click "Insert" and choose the downloaded file
vATIS Profile	Airports Settings for vATIS - LCCC	Download	Open vATIS, click "Insert" and choose the downloaded file

You can find the official vATIS Documentation here: https://vatis.clowd.io/

Setup

After you have downloaded AFV it is now time to set it up.

First you will need to download the vATIS Profiles for LGGG (and LCCC) found in the Software section.

Then open up vATIS and you should see this:

vATIS Main Display

Press “Import” and select the LGGG (and LCCC) profile. Then you should see this:

vATIS Profile

Double click on one of the profiles that you have imported, eg LGGG.

Then a window will pop-up asking you to configure your vATIS. Configure vATIS like this below:

vATIS Settings

Then press "Save Settings", then “Cancel” and you will be brought again to the main vATIS Display

vATIS Display

The first airport in the list is LGAV (HvACC's training airport)

You can select the appropriate runway configuration by clicking the menu bar and selecting the correct rwy config, eg DEP 03R ARR 03L:

Click the Menu Bar to select the RWY Config in use

You are good to go!